Wings
+ Add a link
For example wiki articles, forum threads or suppliers' pages about this chapter.
| Section | Plans ref. | Status | Entries | Hours |
|---|---|---|---|---|
| Receipt and inventory | Complete | 1 | 5 | |
| Main spar | Section 13 | Complete ✔ Approved | 4 | 15 |
| Wing ribs | Section 14 | Complete ✔ Approved | 3 | 12.5 |
| Rear spar | Section 15 | Complete ✔ Approved | 2 | 7.5 |
| Top wing skins | Section 16 | Complete | 4 | 15 |
| Outboard leading edge | Section 17 | Complete | 4 | 15 |
| Fuel tank | Section 18 | In progress | 5 | 19.5 |
| Stall warning system | Section 19 | Not started | 0 | 0 |
| Bottom wing skins | Section 20 | Not started | 0 | 0 |
| Aileron | Section 21 | Not started | 0 | 0 |
| Flap | Section 22 | Not started | 0 | 0 |
| Aileron actuation | Section 23 | Not started | 0 | 0 |
| Wing tip | Section 24 | Not started | 0 | 0 |
Latest in Wings
All entries →Baffle ready
Sealed the fuel pickup and vent fittings. The left tank is ready to close; asked Kari for a look before I rivet on the baffle.
Fuel pickup and vent
Installed the fuel pickup tube, the vent line and the fuel level sender in the left tank.
First sealant
The ProSeal arrived. Sealed the ribs to the left tank skin. Messy, but going OK.
Tank parts prepared
Match-drilled the tank skins and the baffle. Deburred and dimpled everything. Ordered more ProSeal.
Tank ribs
Fluted the fuel tank ribs and fitted them inside the tank skins.