Demo You are looking at LN-DMO as its owner sees it – build log, costs, maintenance, notifications and settings. Look around freely; nothing can be changed. Start your own
LN-DMOVan's Aircraft RV-10 · build log
Tasks 2 Inspections 11
Settings What is Firstflight? Log in
Planning
Building
Final inspection
Flight test (Phase 1)
In service

Wings

23 entries

+ New entry
NO PHOTO
2026-11-07 Wings › Fuel tank

Baffle ready

Sealed the fuel pickup and vent fittings. The left tank is ready to close; asked Kari for a look before I rivet on the baffle.

3.5 h ⧗ Awaiting inspection
NO PHOTO
2026-10-31 Wings › Fuel tank

Fuel pickup and vent

Installed the fuel pickup tube, the vent line and the fuel level sender in the left tank.

4 h
NO PHOTO
2026-10-17 Wings › Fuel tank

First sealant

The ProSeal arrived. Sealed the ribs to the left tank skin. Messy, but going OK.

4.5 h
NO PHOTO
2026-10-03 Wings › Fuel tank

Tank parts prepared

Match-drilled the tank skins and the baffle. Deburred and dimpled everything. Ordered more ProSeal.

4 h
NO PHOTO
2026-09-23 Wings › Fuel tank

Tank ribs

Fluted the fuel tank ribs and fitted them inside the tank skins.

3.5 h
NO PHOTO
2026-09-19 Wings › Outboard leading edge

Leading edges on the wings

Attached the leading edges to the main spars. The wings are starting to look like wings.

2.5 h ⧗ Awaiting inspection
NO PHOTO
2026-09-12 Wings › Outboard leading edge

Leading edges riveted

Riveted the leading edges. Left one has the stall warning cut-out, which I'll finish later.

4 h ⧗ Awaiting inspection
NO PHOTO
2026-08-29 Wings › Outboard leading edge

Leading edges assembled

Clecoed the leading edges to the spars, match-drilled, then deburred and dimpled.

4.5 h ⧗ Awaiting inspection
NO PHOTO
2026-08-19 Wings › Outboard leading edge

Leading edge ribs

Fluted the leading edge ribs and fitted them inside the skins.

4 h ⧗ Awaiting inspection
NO PHOTO
2026-08-15 Wings › Top wing skins

Two rivets replaced

Drilled out and replaced the two smiley rivets near rib 9 on the left wing. They look good now.

1.5 h ⧗ Awaiting inspection