Wings
23 entries
Baffle ready
Sealed the fuel pickup and vent fittings. The left tank is ready to close; asked Kari for a look before I rivet on the baffle.
Fuel pickup and vent
Installed the fuel pickup tube, the vent line and the fuel level sender in the left tank.
First sealant
The ProSeal arrived. Sealed the ribs to the left tank skin. Messy, but going OK.
Tank parts prepared
Match-drilled the tank skins and the baffle. Deburred and dimpled everything. Ordered more ProSeal.
Tank ribs
Fluted the fuel tank ribs and fitted them inside the tank skins.
Leading edges on the wings
Attached the leading edges to the main spars. The wings are starting to look like wings.
Leading edges riveted
Riveted the leading edges. Left one has the stall warning cut-out, which I'll finish later.
Leading edges assembled
Clecoed the leading edges to the spars, match-drilled, then deburred and dimpled.
Leading edge ribs
Fluted the leading edge ribs and fitted them inside the skins.
Two rivets replaced
Drilled out and replaced the two smiley rivets near rib 9 on the left wing. They look good now.